Les internautes ont aussi acheté
Description
Vous développez des projets électroniques avec communication CAN ?
Le kit de 4 Modules Bus CAN TJA1050 de Youmile est l'outil idéal pour vos cartes de développement MCU ARM ou 51.
Fiable, performant et facile à intégrer.
PCA82C250 is the interface between CAN protocol controller and physical bus.
This device provides differential transmission capability for the bus and differential reception capability for the CAN controller.
Like PCA82C250, TJA1050 complies with ISO 11898 standard.
Therefore, it can work with other transceiver products that comply with ISO 11898 standard.
Electromagnetic compatibility (EMC) is the main design goal of TJA1050.
Its radiation ratio in the key AM band PA82C250 is lower than 20dB.
In addition to EMC, another important feature of TJA1050: When it is not powered on, the bus exhibits passive characteristics.
This makes TJA1050 a more optimized transceiver for clamp-15 nodes that lose power after ignition.

The node (clamp-30) that is continuously powered on requires a dedicated low-power mode to keep the power consumption of the entire system as low as possible.
Since the pins of TJA1050 and PCA82C250 are compatible with each other, TJA1050 can be used directly in existing applications without the need to modify the PCB.
Feature 1.
High rate up to 1Mbit/s.
2.

Very low electromagnetic radiation EME.
3.
Electromagnetic anti-interference EMI is extremely high.
4.

The TxD pin has a timeout function to prevent clamping at the dominant bus level.
5.

Listen-only mode and Babbling Idiot protection are provided in silent mode.
6.
Protect the bus pins to prevent transient interference in the automotive environment.
7.

TJA1050 CAN module input power is 5V 8.
The output driver is temperature protected 9.
Prevent short circuit of battery to ground 10.
At least 110 nodes can be connected.
Package includes: 4 x CAN Controller Interface Module 4 x 6-pin pin header 25 x Dupont wire.

✅ [Excellentes performances] : l'excellente symétrie de l'étage de sortie TJA1050 rend ses performances CEM meilleures que les autres produits du même type.
L'EMI anti-interférence électromagnétique est extrêmement élevée.
✅[Débit de transmission élevé] : le débit peut atteindre 1 Mbit/s et le plus bas peut être de 60 Kbit/s.
✅[Connexion multi-nœuds] : Au moins 110 nœuds peuvent être connectés.
Les nœuds qui ne sont pas sous tension ne causeront pas d'interférences sur le bus.
✅[Anti-interférence]: Protégez les broches du bus pour éviter les interférences transitoires dans l'environnement automobile.
✅[Contenu de l'emballage] : 4 modules d'interface de contrôleur CAN TJA1050 ; 4 en-têtes à 6 broches ; 25 fils dupont.
Parfait pour vos prototypes automobiles, industriels ou DIY, ces modules offrent une compatibilité étendue et une grande fiabilité.
Idéal pour les makers, étudiants et professionnels en électronique.
Avis clients
-
0 avis pour la note d'une étoile1
-
0 avis pour la note de 2 étoiles2
-
0 avis pour la note de 3 étoiles3
-
0 avis pour la note de 4 étoiles4
-
2 avis pour la note de 5 étoiles5